Home>Products>OSBORN LOAD RUNNERS BEARING>OSBORN LOAD RUNNERS VLRE-7-1/2 Cam Follower and Track Roller - Stud Type
OSBORN LOAD RUNNERS VLRE-7-1/2 MODELS
Need a CAD or 3D Model?
OSBORN LOAD RUNNERS VLRE-7-1/2 Cam Follower and Track Roller - Stud Type
OSBORN LOAD RUNNERS BEARING
OSBORN LOAD RUNNERS VLRE-7-1/2 Bearing SPECIFICATIONS
With over 10170 full-service stores, our OSBORN LOAD RUNNERS VLRE-7-1/2 Cam Follower and Track Roller - Stud Type inventory is extensive and 194000 lb C - Dynamic Load (Basic) our parts are priced right. within 24 hours. This Vickers PUMP LIMITED 0.0063 in Pre Install Clearance Min helps you maximize your productivity by saving time and your hard-earned dollars.
- OSBORN LOAD RUNNERS
VLRE-7-1/2
- 0.0063 in
- 194000 lb
- 0.0063
- Single V-Lock
- 1.50 in
- 3.89
- 0.0079 in
- 650 rpm
- Vickers PUMP LIMITED2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
OSBORN LOAD RUNNERS VLRE-7-1/2 Cam Follower and Track Roller - Stud Type specification
- 0.0063 in
- 194000 lb
- 0.0063
- Single V-Lock
- 1.50 in
- 3.89
- 0.0079 in
- 650 rpm
- 0.26
- 5.450 in
OSBORN LOAD RUNNERS VLRE-7-1/2 OSBORN LOAD RUNNERS VLRE-7-1/2 Cam Follower and Track Roller - Stud Type Technology
No. | Brand | r | a | J | D | A | H | G | e |
HPJ-85 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
PLRN-2-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
HPVA-76 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
PLRE-3-1/4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
VLRE-5-1/2 | OSBORN LOAD RUNNERS | - | - | - | 170 | - | - | - | - |
PLRU-1-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | 48 mm | - | M6x1 | - |
FLRE-3-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
PLRY-2-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
HPCE-50 | OSBORN LOAD RUNNERS | - | - | - | 26 mm | - | - | - | - |
VLR-3-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
PCR-11/16 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
HPC-30 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | 62 mm |
PLRS-1 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
HPJ-200 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
PLR-10 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
CLRY-1-3/4 | OSBORN LOAD RUNNERS | - | - | - | - | 28 mm | - | - | - |
HPC-100 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
FFLR-2-4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
FLR-3-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
PLRSE-1-3/4 | OSBORN LOAD RUNNERS | - | - | - | 120 mm | - | - | - | - |
PLRE-2-3/4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
HPVE-125 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
PLRS-2-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
NCFY-1-1/2-S | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
NCF-3-SB | OSBORN LOAD RUNNERS | - | - | 170.5 mm | - | 60 mm | - | - | - |
VLRS-1-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
VLRY-3-3/4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
OSBORN LOAD RUNNERS FLRY-2-3/4-7 Cam Follower and Track Roller - Yoke Type | G2 - Heat Generation Factor (Rib-Roller End):23; B - Cone Width:1.1420 in; d:2.1654 in; G1 - Heat Generation Factor (Roller-Raceway)11:77.2; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:56100 lbf; Cup Part Number:472DC; Series:475; e - ISO Factor8:0.38; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:8360 lbf; T - Bearing Width across Cones:2.5625 in; |
OSBORN LOAD RUNNERS FLR-4-1/2 Cam Follower and Track Roller - Stud Type | Number of Bearings:Double; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; RoHS:6; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Days to Ship:8 Days; |
OSBORN LOAD RUNNERS PLRSE-1-1/4 Cam Follower and Track Roller - Stud Type | Shaft Size :3 in; Oil Lubrication - M/N Seal:1400 rpm; Dimension A:11.12 in; Oil Lubrication - B/C/O Seal:1100 rpm; Y2 - Geometry Factor:4.31; Dimension F:8.35 in; Dimension E:6.68 in; Dimension RV:0.04 in; Dimension BC:9.45 in; Housing Style:Four-Bolt Square Fla; |
OSBORN LOAD RUNNERS PLRE-1-1/2 Cam Follower and Track Roller - Stud Type | Housing Style:Two-Bolt Flange; Bearing Number:GYA112RRB; Seal Type:Narrow Shroud; Center of Bearing from Bearing End S:15 mm; Bolt Hole Spacing J:148.00 mm; Housing Width A:1.126 in; Inside Ring Outside Diameter:2.280 in; Total Height L:111.1 mm; Dynamic Load Rating:8160 lbf; Bearing Type:Ball Bearing; |
OSBORN LOAD RUNNERS HPJ-50 Cam Follower and Track Roller - Stud Type | e:15 mm; Recommended tightening torque for set screw:5.5 Nm; A2:41.5 mm; d1:32.4 mm; J:78 mm; A1:12 mm; Designation of housing:FA204N-; B:34 mm; C0:6.65 kN; A:25.5 mm; |
OSBORN LOAD RUNNERS FLR-2-1/2 Cam Follower and Track Roller - Stud Type | Dimension G:3.00 in; Dimension SA:4.03 in; Shaft Size Type:Imperial; Dimension B:10.25 in; Bearing Number:22218; Locking Style:Single Concentric; Grease Lubrication - T Seal:2000 rpm; Eng Internal Radial Clearance - Min:0.0024; Dimension RA:0.12 in; Pre Install Clearance Max:0.0039 in; |
OSBORN LOAD RUNNERS NCF-1-1/4-SB Cam Follower and Track Roller - Stud Type | Type:Bearings with Housin; Width T(mm):30; Flange Shape:Round Type; RoHS:6; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Bearing Part Number:6704; |
OSBORN LOAD RUNNERS PLR-2-1/2 Cam Follower and Track Roller - Stud Type | Bearing Type:Thrust Tapered Rolle; Oil Holes in Retainer:No; Weight:1.7 lb; d - Bore Diameter:2.0720 in; B:1.0310 in; D - Bearing O.D.:3.6720 in; R - Fillet Radius Shaft (Max):0.03 in; Steering Pivot Rating:19400 lbf; |
OSBORN LOAD RUNNERS HPCE-125 Cam Follower and Track Roller - Stud Type | Number of lubrication holes:0; Characteristic rolling element frequency, BSF:5.95 Hz; da min:99 mm; Nlim:4,600 rpm; Y2:4.46; D:180 mm; Max operating temperature, Tmax:200 °C; d:85 mm; Y0:2.93; Fatigue limit load, Cu:44.7 kN; |
OSBORN LOAD RUNNERS FLR-3 Cam Follower and Track Roller - Stud Type | N1:25 mm; T min.:-20 °C; Weight:3.8 kg; L3:95 mm; A:64 mm; N:35mm; Designation of housing:T211N-; Recommended tightening torque for set screw:16.8 Nm; A5:33.4 mm; Z:26.6 mm; |
OSBORN LOAD RUNNERS VLRE-7-1/2 Cam Follower and Track Roller - Stud Type Video
IDLER ROLLER & RAIL SOLUTIONS - Osborn
Osborn VLRE-7 1/2 Load Runner
OSBORN LOAD RUNNERS VLRE-7-1/2 Cam Follower and ...
VLRE-7-1/2 - OSBORN LOAD RUNNERS | Cam Follower and Track ...
Load Runner catalogue - OSBORN-International - Yumpu
OSBORN LOAD RUNNERS VLRE-7-1/2 Cam Follower and Track ...
LOAD RUNNERS V-Grooved - Concentric Stud Style, Inch Sizes
lubrication hole location: Osborn Load Runners VLR-7-1/2 V-Groove ...
Buy v-groove angle: Osborn Load Runners VLR-7-1/2 V-Groove ...
OSBORN LOAD RUNNERS VLRE-7-1/2 INTERCHANGE
OSBORN LOAD RUNNERS BEARING Part series VLRE-7-1/2 is a potential replacement for these common bearing part numbers:
VLRE-7-1/2
VLRE-7-1/2
VLRE-7-1/2
VLRE-7-1/2
VLRE-7-1/2
VLRE-7-1/2
VLRE-7-1/2
VLRE-7-1/2
Contact Us
- Vickers PUMP LIMITED
- AddressAv. das Industrias,Parque Industrial - CEP ,Fazenda Rio Grande - PR - BRAZIL
- Phone(Working Time)+55-65-3-648-38-93
- Fax
OSBORN LOAD RUNNERS VLRE-7-1/2 Technical Articles
75x115x31 bearing dimensions |
25x37x7 bearing size chart mm |
85x120x18 bearing size catalogue |
OSBORN LOAD RUNNERS BEARING CATEGORIES
- Vickers Piston Pump PV Series
- Vickers Piston Pump PVB
- Vickers Piston pump PVH
- Vickers Piston Pump PVQ
- Vickers Vane Pump
- FAG BEARING
- NSK BEARING
- NTN BEARING
- SKF BEARING
- TIMKEN BEARING
- MCGILL BEARING
- OSBORN LOAD RUNNERS BEARING
- PT INTERNATIONAL BEARING
- QM INDUSTRIES BEARING
- RBC BEARINGS
- REXROTH Directional spool valves
- REXROTH Throttle valves
- REXROTH Throttle check valve
- REXROTH HY-CHECK VALVE
- REXROTH Valves
- REXROTH Pressure relief valve
- REXROTH Check valves
- REXROTH Pressure reducing valve
- REXROTH Twin throttle check valve
- REXROTH Directional poppet valves
- REXROTH Throttle check valves
- skf 6312 Bearing
- 6314 c3 Bearing
- 22218 ek Bearing
- skf 729124 Bearing
- Bearing Slewing Ring
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Super Precision Bearing
- Super Precision Angular Contact Bearings
- Super Precision Bearings
- Slewing Ring
- Tapered Roller Bearing
- Cylindrical Roller Bearing
- Thrust Spherical Roller Bearing
- Needle Non Thrust Roller Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
Customers Who Viewed OSBORN LOAD RUNNERS VLRE-7-1/2 Bearing Also Viewed
- OSBORN LOAD RUNNERS VLRE-7-1/2 Cam Follower and Track Roller - Stud Type
- OSBORN LOAD RUNNERS PLRUE-2 Cam Follower and Track Roller - Stud Type
- OSBORN LOAD RUNNERS NCF-1-1/4-SB Cam Follower and Track Roller - Stud Type
- OSBORN LOAD RUNNERS FLRE-3-1/4 Cam Follower and Track Roller - Stud Type
- OSBORN LOAD RUNNERS PLRNE-2-1/2 Cam Follower and Track Roller - Stud Type